NOTE:Click on picture to enlarge. Click back button on your browser to return to this page.
 |
A quick drawing done on Auto Cad, two clamps and a set of aluminum jigs to help align the 3/32" square stock. |
 |
Using a square to line up the two ends. Clamp is holding the two pieces of 3/32" stock the correct distance apart. |
 |
Using my home made soldering rig to solder side braces in. |
 |
Using my home made soldering tweezers worked better. |
 |
The length spacing jig. Corners are a 45° chamfer to clear corner solder joints. |
 |
One side done almost done. Needs the angle braces yet. |
 |
This is an approximation of how the conveyor is going to be placed. |
 |
In line view of where the end o the conveyor is to be placed. |
 |
Cutting the shorter pieces for the cross members and angle braces. I made a jig to help keep the lengths the same on every piece. |
 |
One side piece done. The other needs the angle braces installed. |